Designed to improve the performance of bolted connections, timber connectors are manufactured in accordance with BS EN 912:200 Type C6/C7 and produced from 1mm thick galvanised steel to BS EN 10346:2009 DX51D +G275.
A superior alternative to timber strutting, Herringbone Struts offer a cost effective method of providing necessary lateral support to floor joists as required by the Building Regulations. Fix to the top and underside of joists using the pre-punched holes.
Instore collection only* Heavy duty restraint straps are suitable for horizontal restraint applications such as tying timber roofs and floors into masonry walls.
Available instore only* Angle Bead is used to provide a true, straight corner which protects and reinforces a 2 or 3 coat plaster or render application in its most vulnerable area.
Available instore only* Galvanised (internal use) and stainless steel (external use) Angle Beads for use on traditional wet 2 / 3 coat plaster application.
Available instore only* Galvanised (internal use) and stainless steel (external use) Angle Beads for use on traditional wet 2 / 3 coat plaster application.
Available instore only* Galvanised (internal use) and stainless steel (external use) Angle Beads for use on traditional wet 2 / 3 coat plaster application.
Available instore only* Galvanised (internal use) and stainless steel (external use) Angle Beads for use on traditional wet 2 / 3 coat plaster application.
Available instore only* External Render Stop Bead is predominantly used to form a neat bell shaped edge at the bottom of an external render finish, thus protecting the edge and acting as a run-off for when rainfall occurs.
Available instore only* External Render Stop Bead is predominantly used to form a neat bell shaped edge at the bottom of an external render finish, thus protecting the edge and acting as a run-off for when rainfall occurs. Plaster depth 16 to 20mm, wing dimension 45mm.
Available instore only* External Render Stop Bead is predominantly used to form a neat bell shaped edge at the bottom of an external render finish, thus protecting the edge and acting as a run-off for when rainfall occurs. Plaster depth 16 to 20mm, wing dimension 45mm.
Available instore only* Available in 2.4m lengths in galvanised material only. Drywall Arch Stop Bead is used to provide a precise straight clean finish and also reinforce one-coat plaster on its edge. Can also be used for slight curves in plaster finish because of its slightly malleable condition.
Available instore only* Available in 2.4m and 3.0m lengths in galvanised finish. Locusrite Plaster Stop Bead is available in four sizes for varying thickness of plaster depth - 10, 13, 16 and 19mm.
Available instore only* PVC-U Plaster Stop Bead is used to provide a straight clean finish on the edge of plaster or render at door or window openings and to protect and reinforce this edge.
Strengthen joints that may have become loose and add some additional support with a mild steel Tee Plate. Supplied in packs of 10, the Tee Plate is T shaped with 5 pre-drilled holes. Sold in packs of 10 units and includes fixings.